Narrow Results
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!













Rule SystemFormat
Any system / system-agnostic   Remove Search Term
STL (3D Model)   Remove Search Term
Advanced Search >

 
 Hottest Any system / system-agnostic, STL (3D Model)
 
 Hottest Community Any system / system-agnostic, STL (3D Model)
 
 Newest Titles in This Section
 
 Newest Community Created Titles in This Section
Products found in this section... Sort by: 
 Title    Publisher    Price  
TrueTiles Free Dungeon Sample Pack

TrueTiles Free Dungeon Sample Pack


Presenting a revolutionary new approach to 3D printed dungeon tiles. For a detailed explanation, watch our demonstration below. This sample pack is offered for free in order to allow you experiment with this new form factor. If you like what you see, you can purchase the entire base dungeon pack! Contents: - Field Tile - Corner Tile - Single-Wall Tile - Wooden Door - Straight Clip - Corner Clip...   [click here for more]
Wyloch's Armory   FREE 

Buy Now  
Fantasy Villages: Elven Buildings

Fantasy Villages: Elven Buildings


Elven Buildings contains 31 3D-printable STL models for creating fantastic structures for your elven-folk. These models contain all new original art by Jacob Armour and Will Walker. They are built in the style of Fat Dragon Games villages sets (separate floors, posts, and walls to create many shapes of buildings), and are compatible with all DragonbiteTM villages and terrain. Not shown in the images...   [click here for more]
DungeonPrint  $11.99

Add to RPGNow.com Order  
Fantasy Villages: Mage Tower

Fantasy Villages: Mage Tower


Mage Tower contains 17 3D-printable STL models for creating fantastic structures of mythic locations. The pieces clip together using DragonbiteTM clips, and have a limited number of clip slots to attach to other Dragonbite terrain. NOTE: This set requires the use of a large bed printer like the Ender 3 or Prusa Mk3 with approximiately 220x220 bed space to print the roof. Sketchfab - https://sketchfab.com/models/b4627eacf0de42b0bea0947ef5c1ac86...   [click here for more]
DungeonPrint  $7.99

Add to RPGNow.com Order  
Fantasy Villages: Turtle Shell Huts & Panache Point

Fantasy Villages: Turtle Shell Huts & Panache Point


Turtle Huts and Panache Point contains 13 3D-printable STL models for creating fantastic structures of mythic locations. These models are compatible with all DragonbiteTM terrain, and contain art used with permission under CC-AO by Miguel Zavala, YahooJapan, and DocCopemys. Note that each hut should be built from four wall/floor sections and one shell/roof. Each shell has a "neck cutout" that should...   [click here for more]
DungeonPrint  $5.99

Add to RPGNow.com Order  
Landscape Terrain

Landscape Terrain


This set is was made a "Pay What You Want" title through the awesome efforts of my Patrons. Thank you so much for making this title available to the entire community. A link to the Patreon is included in the files. Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain. Each one is mounted to DRAGONLOCK™ Ultimate...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Egyptian Dungeon Terrain

Egyptian Dungeon Terrain


This set of Egyptian dungeon tiles were crafted using a variety of free and attribution only textures available on the internet. Most tiles contain secret, personally crafted short messages in coded heiroglyphs. This set is my gift to the D&D community, my labour of love for my fellow dungeon masters and avid quest finishers. Take it for free with love, or donate what you can to help me continue...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Dry Caverns

Dry Caverns


This set was made a Pay What You Want title as one of my patreon goals. Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set. 4x4 Hole Stairs V2 1 by skipatlan on Sketchfab 4x4 Stairs V3 by skipatlan on Sketchfab ...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Secret Solo Doors

Secret Solo Doors


Included in this set are 9 custom remixed tiles combining elements from Fat Dragon Games Starter set, Expansion 9, and Villiage 1 set. These doors were requested by my friend @ammulder on the FDG Forums for use as "secret" doors that are clearly visible from one side. They are free to the community in celebration of Fat Dragon Games Kickstarter 3. Each door tile prints in one solid peice and will...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
FDG Dragon Wall

FDG Dragon Wall


Enjoy this free FDG Dragon Logo wall. FDG Dragon Wall Tile by skipatlan on Sketchfab DRAGONBITE™ Community Creator model. For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Egyptian 3 - Light-up Sphinx

Egyptian 3 - Light-up Sphinx


This set was made a "Pay What You Want" title as one of my Patreon goals. Thank you to all of my fans, supporters, and patrons for pushing me to keep on crafting. Included in this small addition to my Egyptian Dungeon Terrain is an oversized sphinx, with space inside for an standard sized (38mmx16mm) tea-light. An inner chamber focuses light towards the eyes. Model dimensions are approximately 70mm...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Elevated Wet Cavern Corners

Elevated Wet Cavern Corners


This set was made a "Pay What You Want" title as one of my Patreon goals. Thank you to all of my fans, supporters, and patrons for the kind words and suggestions that fuel my work. DRAGONBITE™ Community Creator model. For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set Download...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Dungeon Curtains

Dungeon Curtains


Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games! Please see the included ReadMe for print instructions. Dungeon Curtains Display by zergchops on Sketchfab ...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Secret Rotating Doors

Secret Rotating Doors


Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle. It is recommend to use...   [click here for more]
Fat Dragon Games  Pay What You Want

Add to RPGNow.com Order  
Cavern Mine Terrain

Cavern Mine Terrain


This set of tiles was drafted for construction by my patrons. Please be advised these mine tracks are original construction and do not fit the mine tracks from the soon to be published FDG Mines official set. When that set posts, you can expect updates to this set for compatability and track transitions. Included in this set are over 35 remixed models for Fat Dragon Games Caverns dungeon terrain....   [click here for more]
Fat Dragon Games  $8.99

Add to RPGNow.com Order  
Cave Tracks

Cave Tracks


This set of tiles was drafted for construction by my patrons. Please be advised these mine tracks are original construction and do not fit the mine tracks from the soon to be published FDG Mines official set. When that set posts, you can expect updates to this set for compatability and track transitions. Included in this set are over 40 remixed models for Fat Dragon Games Caverns dungeon terrain....   [click here for more]
Fat Dragon Games  $9.99

Add to RPGNow.com Order  
Scatter and Sewer Tracks

Scatter and Sewer Tracks


This set, Scatter and Sewer Tracks, is for use with other Fat Dragon Games products, including the Village Sewers and the Cave Tracks sets. ...   [click here for more]
Fat Dragon Games  $4.99

Add to RPGNow.com Order  
Tower of Terror Extension Walls

Tower of Terror Extension Walls


These files require the DragonLock Tower of Terror set. This is a remix and expansion to the Tower of Terror. These files allow you to create a level without a floor to make a level double high. There are also pieces with stairs mounted to the walls, so you can have stairs go up through the level without a floor. There are 4 wall pieces in this set. The pieces with stairs require supports when printed....   [click here for more]
Fat Dragon Games  $0.50

Add to RPGNow.com Order  
1st Class Dungeons: Dungeon to Cavern Transitions

1st Class Dungeons: Dungeon to Cavern Transitions


This set of 4 dungeon to cavern transition tiles were made upon the request of the community and many of my patrons. ...   [click here for more]
Fat Dragon Games  $1.99

Add to RPGNow.com Order  
Dive Bars

Dive Bars


One of the Will's Choice sets for October 2018. These are special sets crafted for my patrons with lots of love. You can find a link to the patreon in this set and also in many of my Pay What You Want titles like Elevated Sewers. Dive Bars is a remix of the Fat Dragon Games Tavern set with 30 models in it. These are remixed from the official FDG Taverns as well as the Tavern Stage...   [click here for more]
Fat Dragon Games  $8.99

Add to RPGNow.com Order  
Clip-On Walls

Clip-On Walls


This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar...   [click here for more]
Fat Dragon Games  $2.00

Add to RPGNow.com Order  
Best of the Forums: Cavern Ruins

Best of the Forums: Cavern Ruins


This set includes 10 cavern-themed ruined tiles from the fan-created section of the Fat Dragon Games forums. The tiles include: A corner on a ruined floor Two walls on ruined floors A ruined floor with a post (both orientations) A ruined floor with two posts Four various ruined floors Recommended Print Settings: Layer Size: 0.15mm Infill: 15% all...   [click here for more]
Fat Dragon Games  $2.99

Add to RPGNow.com Order  
Aztlan 1

Aztlan 1


Aztlan - A 3D-printable Mesoamerican tileset ordered for construction by the DungeonPrint Community in March 2018. This set includes the starter STL models you’ll need for Aztlan rooms, as well as a grand temple entrance. It is compatible with all other DragonlockTM models. The set includes: The grant temple entrance A doorway with four door designs and a bar the door rotates on Three...   [click here for more]
DungeonPrint  $4.99

Add to RPGNow.com Order  
Stepping Stones

Stepping Stones


This set includes cavern stream tiles with stepping stones in the water. With these you can make a small crossing for your dungeon denizens (and the stones will surely twist and sink beneath the invading PCs!). For a larger crossing, try combining with the Floor Water B and Floor Water D tiles in the FDG Cavern Expansion 1 set. This was the July 2018 bonus set for DungeonPrint Studio...   [click here for more]
Fat Dragon Games  $2.99

Add to RPGNow.com Order  
Konga Rising

Konga Rising


This set of printable terrain STLs is the start of a new style of jungle walls and buildings, with a very special dungeon entrance piece! It was the July 2018 DungeonPrint Community Choice selection. Included pieces: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended Top/Bottom...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Tile Risers for Dragonbite

Tile Risers for Dragonbite


These risers use Fat Dragon Games DragonbiteTM clip-together bases, and support the bottom of an upper layer of Dragonbite tiles. They come in a variety of heights to allow you to position the upper level exactly where you want. The logic behind the various heights is: Elevated/Dais 27.7mm: If you put a floor on top of this, the surface of the floor will be roughly level with...   [click here for more]
DungeonPrint  $0.99

Add to RPGNow.com Order  
Countryside

Countryside


Includes 5 styles each of Asteroid, Rough Dirt, Uneven Ground, and Snowy Drift terrain. Each style is available with and without grid marks. There are a total of 40 STL files that are all DragonbiteTM compatible. A special note of attribution: These tiles use the very wonderful rocks released by Terrain4Print under CC-AO. Recommended Print Settings: Layer Size: 0.15mm, or...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dockyards: Boardwalk

Dockyards: Boardwalk


One of the Dockyards series, this set includes 16 DragonbiteTM-compatible STLs files for a variety of boardwalks and low stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $8.99

Add to RPGNow.com Order  
Dockyards: Stone Piers

Dockyards: Stone Piers


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or...   [click here for more]
DungeonPrint  $10.99

Add to RPGNow.com Order  
Dockyards: Low Docks

Dockyards: Low Docks


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of low docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dockyards: Wood Piers

Dockyards: Wood Piers


One of the Dockyards series, this set includes 13 DragonbiteTM-compatible STLs files that assemble into 10 different pieces for a variety of elevated wood piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Note that the wood piers extending over water print in multiple parts and must be snapped or clipped together; instructions and pictures are...   [click here for more]
DungeonPrint  $7.99

Add to RPGNow.com Order  
Dockyards: Water & Wood

Dockyards: Water & Wood


One of the Dockyards series, this set includes 11 DragonbiteTM-compatible STL files for a the water around the docks and some dressing to put on the docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom...   [click here for more]
DungeonPrint  $4.99

Add to RPGNow.com Order  
Bloody Reef

Bloody Reef


Finish off your harbor with this selection of 7 models including five giant rock formations in the water, an ominous dorsal fin, and Sharky McSharkFace himself! Models are delivered in STL format and DragonbiteTM-compatible. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $2.99

Add to RPGNow.com Order  
Konga Sacrifice

Konga Sacrifice


This set of 3D printable terrain augments the Konga Rising terrain with a new set piece -- a large 6x6" sacrificial rock. There are versions with a DragonbiteTM base and without (in case you want to lay it on top of existing terrain), as well as a bonus 6x6" dirt tile. NOTE: your printer must have at least a 6"x6" print area to print these pieces! Recommended Print Settings:...   [click here for more]
DungeonPrint  $3.99

Add to RPGNow.com Order  
Dockyards: Buildings

Dockyards: Buildings


This set of 3d-printable STLs lets you build endless varieties of buildings in the Dockyards style. It is based on the Fat Dragon Games Village Buildings format, including posts, walls, and gables with a new Dockyards style. NOTE: this set does not include floors or roofs. You will need to own one of the FDG building sets for those (e.g. Timberframe, Wooden, or Walls & Gate). Recommended...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dockyards: Wharf

Dockyards: Wharf


This set of 3d-printable STLs lets you build Dockyard boardwalks and buildings on wooden stilts. It includes bases with stilts in the water, and with a mix of stilts and Dockyard stone walls. It also includes boardwalk surfaces with and without posts to tie ships up to. You can build boardwalks out of these models. Additionally, if you own any of the Fat Dragon Games Village Building sets, you...   [click here for more]
DungeonPrint  $6.99

Add to RPGNow.com Order  
Rowboat

Rowboat


This set of 3d-printable STLs lets you print fantasy rowboats, with or without front-mounted hanging lanterns (and with or without nets and barnacles for decoration). The cover photo shows a painted version of the rowboat with lantern. If you'd like a bigger or smaller boat, the rowboat, lantern, and oar models can be scaled accordingly. Recommended Print Settings: Layer...   [click here for more]
DungeonPrint  $3.99

Add to RPGNow.com Order  
Cracked Marble Floors

Cracked Marble Floors


This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them. Recommended Print...   [click here for more]
DungeonPrint  Pay What You Want

Add to RPGNow.com Order  
HexScapes

HexScapes


Create hex-based landscapes with this variety pack of 3D-printable STL files. DungeonPrint HexScapes contains 6 models, each approximately 35mm wide. Alternating DragonbiteTM clip slots allow for elevation changes. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or...   [click here for more]
DungeonPrint  $4.99

Add to RPGNow.com Order  
Dreamland

Dreamland


This set of 33 3D-printable STL models comes out of the strange sort of dreams that might inspire (or be inspired by) Alice in Wonderland. Though there are all kinds of dreams to explore, we began with broken geometric walls and strange outdoor markings. These tiles are compatible with all DragonbiteTM terrain. (This set also includes a lower surface [gray] tile and upper surface [grass]...   [click here for more]
DungeonPrint  $11.99

Add to RPGNow.com Order  
Dreamland Items

Dreamland Items


This small set was the Dungeoneer bonus set for DungeonPrint patrons in October, 2018. The 3D-printable STL models it contains accompany the main Dreamland set, providing some mind-bending furniture (bed, chair, table, clock) and an uprooted tree to populate your dreamscapes. These models are compatible with all 3D-printed terrain. Recommended Print Settings: Layer Size:...   [click here for more]
DungeonPrint  $2.99

Add to RPGNow.com Order  
It Belongs in a Museum!

It Belongs in a Museum!


"It Belongs in a Museum!" includes a 3D-printable selection of four of our favorite traps and a varity of golden idols. Because who hasn't wanted to recreate their favorite movie scenes? All pieces are compatible with other DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm Infill: 10% recommended; 15% for the falling floor trap insert Top/Bottom...   [click here for more]
Fat Dragon Games  $4.99

Add to RPGNow.com Order  
Pharaoh 1

Pharaoh 1


This set of 3D-printable terrain include floors, walls, corners, and doors in an Egyptian theme. The bases are compatible with all DragonbiteTM terrain. The walls use a new slot style to allow you to customize the pieces -- walls, corridors, and corners -- with far greater ease and reusability. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill:...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Rolling Elevated Terrain

Rolling Elevated Terrain


This set of thirty 3D-printable STLs will give you a variety of rolling terrain for your outdoor landscapes. It includes low and high pieces as well as a variety of countoured edges to make small hills, valleys, and mounds. There are both plain pieces and pieces with a large selection of rocks, as shown below. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dwarven Hold: Clan Ingot Breaker

Dwarven Hold: Clan Ingot Breaker


This set of 3D-printable STL files includes key elements Clan Ingot Breaker for your Dwarven maps: The Dwarven Ingot Breaker, an enormous drill machine with spinning head The Clan Ingot Breaker anvil A flatbed mine cart, and a mobile anvil on the flatbed (for forging wherever it might be required) Floors with iron golem parts (because what else do you mine for) Floors with various...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dwarven Hold: The Lifts of Clan Torr'son

Dwarven Hold: The Lifts of Clan Torr'son


Mines. Sure, you can wheel everything around on mine carts. But you have to dig DEEP to get to the ore, and it gets to be a real drag lugging a mine cart up a long hill. You could make your Goblin slaves push the cart, but then you have to walk all over the place to make sure they do it. So... two birds, one stone. Use the Lifts of Clan Torr'son to move piles of ore up several levels. Bonus:...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Fantasy Villages: Gnomish Farms

Fantasy Villages: Gnomish Farms


Gnomish Farms contains 44 3D-printable STL models for creating village farms for your little people. The pieces include livestock pens, a "chicken" coop, processing equipment, multiple miniatures, and other terrain and structures. The Gnomish Farms are compatible with all DragonbiteTM villages and terrain. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother...   [click here for more]
DungeonPrint  $12.99

Add to RPGNow.com Order  
Pharaoh 2: Map Room

Pharaoh 2: Map Room


This set of 3D-printable terrain expands on the original Pharaoh 1 set with new STL models in the same Egyptian theme. It includes additional floors, walls, corners, pillars, and scaled models to create an entire Map Room. The bases are compatible with all DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill:...   [click here for more]
DungeonPrint  $11.99

Add to RPGNow.com Order  
Dwarven Holds: Core Set

Dwarven Holds: Core Set


This set of 3D-printable STL files includes the basic models for Dwarven Holds. See the related sets below for a variety of Dwarven sets that expand this selection so that you can create all kinds of Dwarven and mine maps! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  Pay What You Want

Add to RPGNow.com Order  
Christmas in 3D

Christmas in 3D


This set of 3D-printable STL scatter terrain was sculpted by Jacob Armour. He took the initiative to craft this set for the community as a free gift. We hope you enjoy these pieces and find a way to work them into your games. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  Pay What You Want

Add to RPGNow.com Order  
Aztlan 2

Aztlan 2


This set of 3D-printable terrain, Aztlan 2, is a continuation of my first self published title. I love Mesoamerican culture and this set seeks to be a celebration of multiple civilizations. It includes several large statues, additional walls and floors in the original Aztlan style, wall decorations, and more -- almost 30 DragonbiteTM-compatible STLs in all. RECOMMENDED PRINT SETTINGS Layer...   [click here for more]
DungeonPrint  $12.99

Add to RPGNow.com Order  
Displaying 1 to 50 (of 576 items) Result Pages:  1  2  3  4  5  6  7  8  9 ...  [Next >>] 
Select Page Number