| Title ▲ |
Fabricante |
Precio |
Fifth edition has changed the rules for spell cone area of effect, the templates we used for previous editions no longer work. "A cone extends in a direction you choose from its point of origin. A cone's width at a given point along its length is equal to that point's distance from the point of origin." Any square more then half in this area is affected by the spell. Simple to describe -... [pulse aquí para ver más] |
3DModels.biz |
$0.99
|
Base set for 16" round space ship rooms. Starting with what you need to build a room with a door. I am going to be expanding on this set, adding interior walls to the exterior walls to make rooms, and also a raised floor set with full walls and half walls. ... [pulse aquí para ver más] |
Fat Dragon Games |
$7.95
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [pulse aquí para ver más] |
Fat Dragon Games |
$1.99
|
This set of 4 dungeon to cavern transition tiles were made upon the request of the community and many of my patrons.
... [pulse aquí para ver más] |
Fat Dragon Games |
$2.99
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons.
... [pulse aquí para ver más] |
Fat Dragon Games |
Paga lo que quieras
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [pulse aquí para ver más] |
Fat Dragon Games |
$2.99
|
This is a basic 3D model for the 1st Generation Armoured Alpha series spacestation.
1st Generation Russian built Armoured Alpha series spacestation. Done during the Serpenti War period.
Model complexity is suitable for tabletop miniature purposes, or a miniature starship display collection.
An iconic starship from the FSpaceRPG universe, but can be used with many other science fiction roleplaying... [pulse aquí para ver más] |
FSpace Publications |
$7.00
|
Over 180 STL files. Floor variations, walls inside the round room walls, for building rooms inside your ship. Lots of door options. Floors are William Walkers Spaceship floors, FDG Starship floors, and my own Famine floors. Choose four "centers" that will create the room you are looking to build, four corners, two "left", and two "right". I print these at .2 with 10%-15% infill, should not need supports.... [pulse aquí para ver más] |
Fat Dragon Games |
$7.95
|
4-Rad Flamwagen Sci-fi Gaming Vehicle 3D Printable .STL files
28mm heroic scale
All the parts of the flamwagen are interchangeable with the 4 rad srurmwagen, so for example you could build a sturmwagen with the wheels from a flamwagon, or a flamwagon with a gun from the sturmwagen.
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many... [pulse aquí para ver más] |
Redstarkits |
$3.00
|
4-Rad Sturmwagen Sci-fi Gaming Vehicle 3D Printable .STL files
Scaled for 28mm heroic wargames
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many others. ... [pulse aquí para ver más] |
Redstarkits |
$2.50
|
This is a set of alternative weapons for the 4Rad sturmwagen.
Most of these can be printed without rafts or supports. The exception is the energy weapon that needs supports.
The 28mm 4-rad sturmwagen is available on Drviethrurpg.com and Wargamesvault.com
Scaled for heroic 28mm wargames
There are a 6 new options + a blank without a gun so you can fit your own ... [pulse aquí para ver más] |
Redstarkits |
$1.50
|
2nd Generation Russian built Armoured Alpha series spacestation. Done during the Serpenti War period.
Model complexity is suitable for tabletop miniature purposes, or a miniature starship display collection.
An iconic starship from the FSpaceRPG universe, but can be used with many other science fiction roleplaying games.
STL model file sales for home printing are for personal non-commercial usage... [pulse aquí para ver más] |
FSpace Publications |
$7.00
|
Complete collection of 3 and 4 inch rooftops from Village Timber set. Cover photo courtesy of Tim Thorpe, who also inspired the need for this set. ... [pulse aquí para ver más] |
Fat Dragon Games |
$4.99
|
This is an .stl file to print a cutting guide for 3" dungeon tile corners. Align the tabs with two sides of a 3" square and cut along the curve with a hot wire or knife. ... [pulse aquí para ver más] |
Highlander Studios, Inc, |
Paga lo que quieras
|
This is a basic set of OpenLock tiles with slides on each piece for slipping printed paper with artwork on it. Users are recommended to download artwork from this site to slide in and enhance your role-playing games.
Using the sleeves are simple. Print the artwork you want to do and cut it to fit into the sleeve on the piece you want it on. It's fast and easy. You get full color 3d layouts for... [pulse aquí para ver más] |
Paul Long Jr Designs |
$2.00
|
3D Printable Alien Mothership:
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Barrack:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Battlecruiser:
Battlecruiser inspired by StarCraft's battlecruiser
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.65
|
3D Printable Building Ruin:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Civilian Cargo Ship:
a typical civilian cargo space craft with a rugged design
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.65
|
![3D Printable Chests [BUNDLE]](https://www.rpgnow.com/images/7523/209578-thumb140.jpg)
3D printable, working chests that you can print out at home and use them as a cheaper, but still visually pleasing, alternative on your tabletop.
They were designed and tested by the two artists of Black Scrolls Games.
These diverse chests will be helpful if your adventure leads your team into a dungeon, a house, chapel, or any other forgotten places.
This special bundle... [pulse aquí para ver más] |
Black Scrolls Games |
$13.93 $10.00
|
3D Printable Cityscape Game Tokens:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Civilian Building in a zip file containing the STLs:
includes interior, separate top and door pieces
stackable with Civilian Building VerB
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Civilian Building VerB in a zip file containing the STLs:
includes interior and separate top piece, stackable with the other civilian building
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Civilian Spacecraft:
this spacecraft has no weapons as its a civilian type space craft made purely to travel
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.67
|
3D Printable Command Center:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$6.76
|
3D Printable Communication Tower:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Container, Crate and Barrel in a zip file containing the STLs:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Control Panels comes with 3 versions in a zip file containing the STLs:
small
medium
large
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Control Tower in zip file containing the STLs:
includes expandable helipads
one end piece and one expansion piece, each with two helipads
not scaled due to size of the model but roughly for 2mm
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Dragon Teeth and Wallsl in a zip file containing the STLs:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Dreadnought Class Space Carrier - Plusllian:
this space carrier has a large hangar bay top and bottom in the center. Armed with 4 twin barrel laser cannons as well as two bigger twin barrel laser cannons on both sides.
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Eagle Class Light Frigate :
based on how assault rifles look like
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.65
|
3D Printable Enforcer Class Battlecruiser - The Thor:
A medium size cruiser packed with 6 deadly sets of twin barrel particle canons on both sides
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Factory:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Floor Turret comes with 2 versions in a zip file containing the STLs:
deployed
retracted
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Floor Turret V2 comes with 2 versions in a zip file containing the STLs:
turrets
missiles
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Ground Missiles, Small Bunker And Container in a zip file containing the STLs:
ground missiles with 3 versions (opened, closed and tilted in 2 pieces), smaller bunker and container
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$7.54
|
3D Printable Hibonite Mining Facility:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Judgement Class Capital Ship:
the brain and command centre of the entire fleet of battle ships, missile frigates and all other support ships
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Large bunker with detachable top in a zip file containing the STLs:
with detechable top so you can store dice / mini's inside
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Large single helipad / drop zone in a zip file containing the STLs:
drop zone compatible with the container, crate and barrel set
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Leviathan Class Space Carrier - The Duke:
3 hangar bays in the center on each side. Instead of using traditional ways like numbers or letters. I've decided to go with 1, 2 and 3 columns wrapping the hangar bays top and bottom.
not scaled
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.18
|
3D Printable Mining Facility in a zip file containing the STLs:
includes individual refinery
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%:
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.62 $4.13
|
3D Printable Mobile Shield Generator:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Modular Cityscape Game Tokens:
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$5.10
|
3D Printable Nuke Silo:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Outpost in a zip file containing the STLs:
includes separate top piece
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$3.00
|
3D Printable Outpost with interior in a zip file containing the STLs:
includes interior and separate decorative pieces (console and barrel)
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.13
|
3D Printable Oxygen Extractor:
includes individual oxygen tank
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [pulse aquí para ver más] |
Project Mobius 3D Design |
$4.15
|
Iniciar sesión 
