| Title |
Publisher ▲ |
Price |
This set adds clip-on wall options to allow full 2" wide cavern corridors and caverns that use the entire space of their floor tiles. It includes:
Standard 2", short 1.5", and long 2.5" clip-on cavern walls, with which you can make any corridor, intersection, or room wall. The short and long walls have two clip slots each, so the same wall works in either orientation.
Clip-on torch, skull, and... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of pyramid tiles was a collaboration between myself and user @arenwel on the Fat Dragon Games forums. He is a true friend and I thank him so much for helping me get where I am now.
There are two different tilesets included in this 26 item title:
1) External, which sits flush to the table and each exterior tile for aesthetics. Connects to Fat Dragon titles on 3 sides.
2) Internal, which... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t... [click here for more] |
Fat Dragon Games |
$5.99
|
Featuring the original art of Jacob Armour. This set is a part of Will's Choice for September 2018, my monthly $10 reward for Patreon pledges. You can find a link in the comments below to get some of the best dragonbite terrain and have a voice in what gets made.
Included in this set are
4 Variations of Large Bookshelves
4 Variations of Small Bookshelves
10 Variations of Library Walls (5 normal,... [click here for more] |
Fat Dragon Games |
$9.99
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe.
Shown with models from others sets: Door... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 17 Dragonbite floor and pillar tiles representing a particularly dank and disturbing dungeon. 12 2x2 inch variations, 4 2x2 Pillars and 1 4x4 tile. It has been a year since I first released the Catacombs floors, later rolled into the huge Catacombs 1 set. These new floors are based on user requests and tons of help from Thingiverse. Thank you to the many artists who published... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe. ... [click here for more] |
Fat Dragon Games |
$7.99
|
I am excited to share this set. The Dank Prison Set includes 29 unique tiles that will complete any prison scheme you could imagine. I have designed this set to integrate perfectly with existing FDG Dungeon Tiles.
I am also excited to share two door tiles. One is an opposing door hall tile and the other is 3 doors at the end of a hallway.
If anyone finds this set lacking something specific, please... [click here for more] |
Fat Dragon Games |
$9.99
|
Included in this set are the following .stl models
2x2 Dungeon Floor - Skull Base 1 (Middle)
2x2 Dungeon Floor - Skull Base 2 (Corner)
Solo Water Pool
Solo Acid-Blood Pool
Solo Human Stew pool
2x2 Dungeon Floor - Hole Tile with Brace
Swappable Chest 1, Chest 2, Create, Keg, Sack, Tentacle, Tentacle 2, and Water
2x2 Dungeon Multi Wall Base
Multi Wall Shaft
Rotating Secret Wall with... [click here for more] |
Fat Dragon Games |
$19.99
|
114 doorways with posts on either ends so they can fit on a 2x2 village floors tile, or across a 1 inch village floor between walls. 4 sets in all, 30 pegged posted doorways that fit on a 2x2 tile, and a copy of each with holes instead for magnets. 27 doorways that fit between walls over a 1 inch floor, and copies of each with holes for magnets. 6 timber posts with round pegs for easy placement and... [click here for more] |
Fat Dragon Games |
$7.95
|
This set includes walls; A,B,C,D,D with one window, D with two windows, and D with a door. It includes the lintels for the door and windows, but you will need a Fat Dragon Games, Dragonlock Ultimate Buildings set to get the actual door, and windows. Each wall has fieldstone on one side, and wooden interior walls on the other. That way, they are not only reversable, but also show a different interior... [click here for more] |
Fat Dragon Games |
$4.99
|
DRAGONBITE CHUNKY DRAGON FLOOR ADAPTERS
Easily turn your existing 1-inch per square dungeon floors to a more miniature friendly 1.25-inch per square scale.
These floor adapters can transform your already-printed 1-inch square 2x2, 2x4, and 4x4 tiles to the larger scale without requiring a full reprint of the tile. The adapters use much less filament to produce and require much less time to print. ... [click here for more] |
Fat Dragon Games |
$3.99
|
Dragonshire Buildings - Door Variations
**NOW WITH** Narrow and extra-narrow door variations from FDG 0301 Dragonshire Doors and Windows!
This set includes STLs:
FOR ENTRYWAYS AND LARGER PASSAGEWAYS:
12x 2.5 in External Double Doors (Bldg 1, Bldg 2, +custom wood-framed doors doors – Left-facing and Right-facing, and reverse doors that swing outwards)
6x 2.5 in Internal Double Doors (Bldg 1,... [click here for more] |
Fat Dragon Games |
$5.99
|
Slotted-Hinge Doors and 2/3rd Height Separate Walls
This set includes STL files for:
Slotted-Hinge Doors:
Steel Door
Prison Door
Broken Wood Door
Remixed from FDG0183U – DRAGONLOCK Ultimate – Dungeon Expansion Set 9. These doors have been redesigned to be interchangeable with the standard separately hinged dungeon doorways found in various Fat Dragon Game DRAGONLOCK sets. To use them, you... [click here for more] |
Fat Dragon Games |
$2.99
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games!
Please see the included ReadMe for print instructions.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are three custom remixed Fat Dragon Games Dungeon Tiles. Add pools of nefarious and vile liquids to your dungeons. Your most fearsome evil wizards will thank you gleefully. Wonderful for pushing players into or goading into a swim with a failed perception check. These pools will make a great addition to any dungeon. To maximize the ulitility of this set, we suggest you also pick... [click here for more] |
Fat Dragon Games |
$2.00
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Take your decks to the next level, literally! This set includes everything you need for multi-level cavern decks. Check out the preview below. Enjoy!
Set Preview:
:lang="en">Elevated Cavern Deck Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
A requested remix from Jim, this remix of the magic wall is ready to burn your players to a crisp.
... [click here for more] |
Fat Dragon Games |
$1.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
This Barn set contains models by several of us who were active on the FDG forums for many months, in particular Arenwel, Colin, Aaron, and I. It was a wonderful time of learning for us and Arenwel was a wonderful instructor. He and Colin were the primary artists on this set, and we hope you all of the hard work and effort that went into this set.
Other sets often used for Barn Construction:
FDG Village... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Gaoler Lou's is your source for FDG Dungeon Windows, Jails, Prison Bars, Shackles, and all the other models you need to make sure those pesky adventurers stay locked up until the trial or other, faster methods of "Justice." Included in this set are new Dungeon windows, with and without bars or grates. There are also Village Walls A-E for a new Prison Wall setup to match Arenwel's awesome prisons.... [click here for more] |
Fat Dragon Games |
$12.99
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
The Gibbet Set
This is my Gibbet Set ~ It includes 3 differint dice tower bottoms, one has a gibbet hanging on both sides of the opening. The other two are on the left and right. A 4X4 tile with a tall post to hang your gibbet from that is on a village street tile. An A and C Gatehouse tile remixed to hang a gibbet from. The top of tree D with a hole for the hook to hang the gibbet from. You will... [click here for more] |
Fat Dragon Games |
$2.00
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path.
Included Models:
Recommended Print Settings:
Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 15% for all models recommended, 5% minimum
Top/Bottom... [click here for more] |
Fat Dragon Games |
$7.99
|
Everything you need to build basic hex dungeons. 26 new models using the Fat Dragon Dungeon walls on Hex Bases. Either put these together with the included pegs, or use the modified Dragonbite Clips (also included) for a tighter fit.
Pieces include;
Left Corner
Right Corner
T-wall
T-wall with right or left corners on the opposite end
Three door frames
Twelve Different Floor Shapes
Three... [click here for more] |
Fat Dragon Games |
$9.99
|
This expansion includes newly mixed Fat Dragon Games models on hex bases to compliment the Hex Dungeon Starter Set.
... [click here for more] |
Fat Dragon Games |
$7.95
|
Included in this set are 13 themed models to augment your Fat Dragon Games dungeons with an H. P. Lovecraft inspired set. Included in this set are the following models:
4x4 Elder Brain (with a slot for tea light underneath)
1 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Brain (Previously released in Separate Walls #1)
Angled Wall... [click here for more] |
Fat Dragon Games |
$3.00
|
This is a collection of one inch by one inch dungeon tiles that use modified Dragonlock Clips to clip together. Sometimes you have to build a HUGE dungeon that could take up three 4X8 tables if you did it to scale. With these, you could fit that dungeon on your dining room table, and still have room for character sheets.
Maybe you are into OSR games with huge sprawling dungeons, or you prefer pen... [click here for more] |
Fat Dragon Games |
$4.95
|
Three LED tiles for the Micro Dungeons set. Slip the bulb in, then the battery under the tile. Bend the wires around and put one on top, one on bottom. The flame and water swap out easily, so no need to print multiple bases, unless you want to. I print the bases at .2 with the FDG cura settings plus 3 walls, and the tops with the FDG mini cura profile. No supports needed, unless you are concerned with... [click here for more] |
Fat Dragon Games |
$2.95
|
Included in this set are 21 awesome new tiles to compliment your Fat Dragon Games Caverns! This set is specifically made to compliment the FDG Caverns Expansion 1, Wet Caverns, and Dry Caverns.
More Caverns Display
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$9.00
|
I am excited to release this set! It is designed to perfectly integrate with existing FDG dungeon and catacomb sets or it can stand alone. The set includes 30 unique tiles, a custom door and lintel, and a special LED Torch Wall. The set also includes two versions of the pentagram centerpiece as well as mutiple floor variations so you can choose your favorite.
As you can see from the pics and if you... [click here for more] |
Fat Dragon Games |
$9.99
|
These are walls and a dungeon floor that make it possible to open the walls of your tower like a cabinet, so that you dont need to take the tower completely apart to use it. Instead, it opens like a "playset". the floors can optionally stay attatched to the swinging walls to make it easier to access the decor and miniatures inside, if so desired, or, you can open just the walls to retain the round... [click here for more] |
Fat Dragon Games |
$7.95
|
A small collection of 3 inch tiles I made for Michael Potter. There are a couple of different lock options, so that if you needed a 15 foot wide hall, you can center a door at the end with the "4 lock" version. Alternatively, if you need to butt up against a 2x2 tile, you will want to use a "6 lock" option. There is also an experimental "8 lock" option on the 2x3 tile.
Included... [click here for more] |
Fat Dragon Games |
$1.00
|
This huge set of terrain, Remix Requests 2, is a collection of several smaller requests from the patrons who continually support my success and allow me to create so many wonderful tiles! This set is dedicated to all of you. Thank you so very much for granting me your trust and support!
Chasm 2: Crow Pie Cavern - This 30 item set expands on the Chasm 1 set that Aaron Mulder and I did last year. ... [click here for more] |
Fat Dragon Games |
$29.99
|
The Riverside Core set is designed to integrate with the Woodland Sets to provide a more immersive outdoor battleground. This set comes with 18 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum with adaptive layer settings... [click here for more] |
Fat Dragon Games |
$9.99
|
The Riverside Elevation set is designed to integrate with the other Riverside and Woodland Sets to provide a more immersive outdoor battleground. This set comes with 24 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum... [click here for more] |
Fat Dragon Games |
$9.99
|
Glad tidings are here! No more shall the long-suffering GMs of this world toil with no escape. Never again shall they be forced to endure session after session of murder-hobo antics. Now, no matter what Fat Dragon Games dungeon your players have seen fit to debase, you'll have the solution. “Rocks Fall, Players Die” is the newest and last Community Creator set you’ll need for... [click here for more] |
Fat Dragon Games |
$3.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
Log In 
