| Title |
Publisher |
Price ▲ |
Level up your game with PuzzleLock Caves! 3D printable terrain for tabletop RPGs. No need for clips or magnets--these tiles lock together with a puzzle connection. This Sample pack contains selections from PuzzleLock Dungeons, PuzzleLock Caves, and PuzzleLock Sewers. Try them out, then download the full sets to level up your game!
copyright ©2019 William Sutton. For personal 3D printer... [click here for more] |
Zandoria |
FREE
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Filing Cabinets (3d Printing: STL File) What you see is what you get- two versions of a standard, boring as heck looking filing cabinet, ready to print off and use in your miniatures role playing games. Are they interesting to look at? Not in the slightest. They are filing cabinets- they are not supposed to look cool. What's important to the characters is the stuff inside these things.... [click here for more] |
Fishwife Games |
Pay What You Want
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Terry wanted one of these, so i took a crack at it. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Primordial Ooze (3D Print STL File) A disgusting amoeboid monster to satisfy all your needs for slimes, jellies, oozes, and sludges. Perfect for fantasy, post apocalypse, sci-fi, weird fiction, or any other setting that would call for such a creature. The preset dimensions for the primordial ooze are 32x45x7mm. Naturally you will want to resize this if needed to fit the monster dimensions... [click here for more] |
Fishwife Games |
$0.55
|
Office Desk (3D Printing STL File)
A very standard looking office desk for modern, cyberpunk, zombie outbreak, or post apocalypse type settings.
Recommended Print Dimensions: 50x21.5x19mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very... [click here for more] |
Fishwife Games |
$0.60
|
Mutant Plant (3D Print STL File) A large, sickly mutant plant perfect for your apocalyptic wastelands, alien landscapes, or bizarre fantasy environments. Default size settings are 50x50x33mm. ... [click here for more] |
Fishwife Games |
$0.65
|
Trap Door (STL 3D Printing Model File)
This rough wood trap door is a good addition to dungeon settings, grim manors, weird pirate ships, etc. Just place on the floor of the dungeon and you are good to go. Could also be propped up (and resized) to make a regular door if you like.
The preset dimensions for this file is 34x32x8mm. Feel free to adjust it as needed when you load the... [click here for more] |
Fishwife Games |
$0.65
|
Work Bench (3d Print STL File)
This 3d print file is miniature prop terrain piece resembling a utility work bench. Perfect for a modern garage, work shop, factory, etc. as well as for super hero lab, cyberpunk, and even sci-fi settings.
Default STL File Dimensions: 74x24x38mm Need help or recommended print settings? These are slow but here's what we often use in Cura with our Ender 3 and Ender... [click here for more] |
Fishwife Games |
$0.65
|
Loveseat (3D Printing STL File)
A very standard piece of furniture. Perfect for modern, retro-modern, cyberpunk, near future dystopia, post apocalypse, super hero, and other related settings.
Recommended Print Dimensions: 22x42x22mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA.... [click here for more] |
Fishwife Games |
$0.70
|
Rustic Wooden Chair (STL 3D Printing Model Files)
This stl file features a rustic wooden chair that goes nicely with our rustic wooden table. Perfect for fantasy settings, pirate lairs, isolated cabins, etc. Dimensions are: 14x12x25mm ... [click here for more] |
Fishwife Games |
$0.75
|
Our good friend and patron Tim requested this. He was very kind to test print it and take pictures. Tim has been a supporter of Aether for a long time, and he continues to inspire us to make amazing things. Thank you Tim. Thank you to all our patrons who make it possible for us to do what we love.
... [click here for more] |
Fat Dragon Games |
$0.99
|
12 Pawns (3d printing files) The picture explains it all. A dozen different types of gaming pawns, perfect for printing off and using with your favorite commercial or home brewed board game. The maximum base dimensions for these are 15mmx15mm. Please feel free to rescale them to whatever you wish.
By purchasing this file you get 12 stl files- one of each different pawn, plus an additional... [click here for more] |
Fishwife Games |
$1.00
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons. This set is great for the exterior of buildings where you don't want a tile edge.
... [click here for more] |
Fat Dragon Games |
$1.00
|
Bill requested some four inch doorways. Here are 4 variations. Regular Flat Wall, Left Corner, Right Corner, Two Corners. Each piece contains an optional center clip space, where you can run a narrow passageway off from it if you'd like. ... [click here for more] |
Fat Dragon Games |
$1.00
|
Buddy Cthuhlu, originally on Thingiverse by Kibilz, recut for proper printing with his own custom 4x4 FDG base. Also included is a 4x4 version of the tile for any of your own ideas. This model prints in 3 sections, so that you only have to use supports for the Buddy C top portion.
This tile is a compliment to the Lovecraftian set of terrain.
Please enjoy this free model, and consider supporting... [click here for more] |
Fat Dragon Games |
$1.00
|
This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them.
Recommended Print... [click here for more] |
Aether Studios |
$1.00
|
Crawling Blob (3D Print File) You gasp in horror at the bubbling, pulsating mound of slime creeping towards you. Though amorphous in form the ooze exhibits a locomotion that mimics a humanoid figure crawling in horrid agony on the floor.... could this thing have been once human?!?
The overall shape of the crawling blob adds a bit of a twist to the regular slime monster. Perfect for horror, weird fiction,... [click here for more] |
Fishwife Games |
$1.00
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Giant Fungus (3D Print STL File) A giant, sporing fungus for your gaming terrain needs. Perfect for damp dungeons, alien swamps, foul forests, etc. Though fantasy settings are the most likely choice for this creation, the giant fungus could also easily be found in post apocalypse wastelands, alien worlds, super villain owned gardens, etc. Default size settings are 30x30x43mm. ... [click here for more] |
Fishwife Games |
$1.00
|
INDUSTRIAL HAZARD: WELDING FUEL TANKS (STL FILE)
This 3d print file is miniature prop piece resembling a set of welding fuel tanks in a protective bin with flammable warning logo. Perfect for modern crime settings, super hero, military, cyberpunk, near future dystopian, zombie outbreak skirmishes, or post apocalypse factory crawls.
Default STL File Dimensions: 34x19.5x37mm Need help or recommended... [click here for more] |
Fishwife Games |
$1.00
|
A small collection of 3 inch tiles I made for Michael Potter. There are a couple of different lock options, so that if you needed a 15 foot wide hall, you can center a door at the end with the "4 lock" version. Alternatively, if you need to butt up against a 2x2 tile, you will want to use a "6 lock" option. There is also an experimental "8 lock" option on the 2x3 tile.
Included... [click here for more] |
Fat Dragon Games |
$1.00
|
Retro Floor Model Television (3D Printing STL File)
A funky cool floor model tv from a bygone era. Easy to print and priced as "pay what you want" to give you a sample of what Fishwife Games and creator Dave Woodrum has to offer.
Recommended Print Dimensions: 34x17x21mm
Here's the recommended Cura settings that have worked for the designer's test print using the following:... [click here for more] |
Fishwife Games |
Pay What You Want
|
This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life.
RECOMMENDED PRINT SETTINGS
● Layer Size:... [click here for more] |
Aether Studios |
$1.00
|
Sludge Beast (3D Print File) Another ooze creature for your gaming needs! The sludge beast is a bit larger than the average human figure and ready to pound those heroes into the dust with its acidic psudeopod.
Perfect for horror, weird fiction, fantasy, sci-fi, and post apocalypse settings. Dimensions: 40.6x35.2x32.1mm
Printing and Reproduction Rights: By purchasing this STL file you have the right... [click here for more] |
Fishwife Games |
$1.00
|
Someone asked me for this, so I made it, hopefully its not out there already. ... [click here for more] |
Fat Dragon Games |
$1.00
|
Thrashing Ooze (3D Print File) Echoes of loud thuds make your way as you sense something coming towards you from the passages to the east. You shine light down the corridor to reveal a thrashing, nightmarish creature working its way towards your direction. This massive beast is amoeboid in nature and appears to be driven by a primal hunger...
Perfect for horror, weird fiction, fantasy, sci-fi, and... [click here for more] |
Fishwife Games |
$1.00
|
SCI-FI GEAR: WRETCHED A.I. (3D Printing STL File)
An overwhelming sense of dread overcomes you as you hear the door shut with a clang behind you. The temperature starts to rise uncomfortably in the room. You know that the face... that unhuman thing... is causing it. You carefully walk closer to the mechanical station that houses the artificial intelligence. You're nervous and you... [click here for more] |
Fishwife Games |
$1.75
|
3D PRINT IT SERIES: BIO VAT
"I stood back in horror as the vat's seal released with hiss. Glowing greenish fluid began to leak out the sides as the thing forced its way out... scaly, slimy, and obviously unnatural, the being snarled at me with its nightmarish face."
The Bio Vat is a perfect addition to any super hero or villain base. This model also works perfectly for a variety... [click here for more] |
HAZARD Studio |
$1.99
|
RUSTIC TAVERN FURNITURE:
“Hello friends! Make your selves at home… I’ll have a wench over with some starter ale and hot rolls in just a moment...” The bartender calls out to the party and seems friendly enough. The place appears to be well stocked and laid out with wooden furniture that is quite durable but rustic in nature. The thief eyes the bench for possible splinters... [click here for more] |
HAZARD Studio |
$1.99
|
Included in this set of 3d printable terrain you will find 8 .STL files. I made these 2 years ago. Then I forgot to get them test printed for a year. They came back great, but I forgot to publish them for another year. I'm terrified what will happen if I don't get these published right away. I hope you enjoy them.
... [click here for more] |
Fat Dragon Games |
$1.99
|
3D Print or Etch your own Pool Point tokens for Eclipse Phase Second Edition!
The Eclipse Phase Second Edition Pool Points Hack Pack contains:
5 STL and 5 SVG files for: Insight, Moxie, Vigor, Flex, and Threat tokens.
Eclipse Phase Second Edition introduces Point Pools — in-game resources players can use to push their characters's skills and abilities farther,... [click here for more] |
Posthuman Studios LLC |
$1.99
|
A requested remix from Jim, this remix of the magic wall is ready to burn your players to a crisp.
... [click here for more] |
Fat Dragon Games |
$1.99
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
Included in this set of 3d printable terrain you will find 9 .STL files. I made most of these tiles 2 years ago. Then, in an early senior moment, I forgot to get them test printed for a year. They came back great. However, in what could be an early sign of something worse, I forgot to publish them for another year. I'm terrified what will happen if I don't get these published right away. I hope you... [click here for more] |
Fat Dragon Games |
$1.99
|
Alien Techno-Monolith Shrine (3d Printing: STL File) Alien Techno-Monolith Shrine is essentially a weird prop piece that can be 3d printed and used in a variety of settings- including weird fiction/horror, space opera, retro sci-fi, super hero, post apocalypse, etc. What is it? What does it do? That's entirely up to the Game Master. Maybe it teleports a character to another planet... [click here for more] |
Fishwife Games |
$2.00
|
Included in this title are stl models for 6x6 and 8x8 Dungeon and Cavern (revised) floors. For use with Fat Dragon Games Dragonlock terrain systems. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
There are 7 new doors in this set that are compatible with FDG Castles and Towers of Terror.
-Solid Iron Door
-Distressed Solid Iron Door
-Barred Window Iron Door
-Distressed Barred Window Iron Door
-Barred Iron Door
-Distressed Barred Iron Door
-Broken Wooden Door
-Unique Hinge that works with these doors, and FDG doors
These doors will not fit on the regular FDG hinge, but the... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this title are 12 remixed tiles for Fat Dragon Games Caverns Terrain.
4x4 Elevated Cavern Floor
4x4 Crater
4x4 Elevated Crater
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Ledged Rock
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Formation Rock
4x4 Water tile with Rock Formation
4x4 Water Tile with Ledged Rock
4x4 Water Tile with Rock... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are three custom remixed Fat Dragon Games Dungeon Tiles. Add pools of nefarious and vile liquids to your dungeons. Your most fearsome evil wizards will thank you gleefully. Wonderful for pushing players into or goading into a swim with a failed perception check. These pools will make a great addition to any dungeon.
For suggested print settings, please download the free Dragonlock™... [click here for more] |
Fat Dragon Games |
$2.00
|
This set of 3D-printable STL terrain is an expansion of the core Dwarven Holds set for those Dwarves who appreciate, well, the ale-ier things in life. Bigger, ale-ier things. It may not be obvious at first glance, but that’s a regular-size anvil next to the cask in the thumbnail below, which means it holds about as much ale as a Storm Giant. And it’s not just any ale! The Tartalan Clan... [click here for more] |
Aether Studios |
$2.00
|
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 4 3d printable .STL files for your tabletop games.
TERRAIN Recommended Print Settings:... [click here for more] |
Aether Studios |
$2.00
|
Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own.
See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$2.00
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
This newest release of Seraphim includes a few miniatures we really wanted to get out. Pope Qarl and his Elemental Gargoyle Band are the warriors of Juvé, Goddess of Regrowth. We used these Gargoyles in the Seraphim Shortwall set and wanted to fill the request for miniatures, we hope you enjoy these supportless printing miniatures.
Recommended Print Settings:
Layer Size:... [click here for more] |
Aether Studios |
$2.00
|
Just a couple of tiles I thought made for a good sewer. Please note, sewers are filled with toxic gasses of all kinds. Use faerie fire only with torches. Unless exploding players is your goal. For which, these also work.
From left to right, top to bottom
Corridor for Sewer Opening
Sewer Drain to Water
Torch Clip On Wall (2inch)
Rotating Secret Sewer Wall (2 parts)
Clip On Wall (2inch)... [click here for more] |
Fat Dragon Games |
$2.00
|
