Close
Close
Narrow Results
 Publisher Info
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!













GenreProduct TypeFormatPublisher
Western   Remove Search Term
Maps & Play Aids   Remove Search Term
STL (3D Model)   Remove Search Term
DungeonPrint   Remove Search Term
Advanced Search >

 
 Hottest Western, Maps & Play Aids, STL (3D Model) from DungeonPrint
 
 Newest Titles in This Section
Products found in this section... Sort by: 
 Title    Publisher    Price  
Bloody Reef

Bloody Reef


Finish off your harbor with this selection of 7 models including five giant rock formations in the water, an ominous dorsal fin, and Sharky McSharkFace himself! Models are delivered in STL format and DragonbiteTM-compatible. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $2.99

Add to RPGNow.com Order  
Dockyards: Boardwalk

Dockyards: Boardwalk


One of the Dockyards series, this set includes 16 DragonbiteTM-compatible STLs files for a variety of boardwalks and low stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $8.99

Add to RPGNow.com Order  
Dockyards: Buildings

Dockyards: Buildings


This set of 3d-printable STLs lets you build endless varieties of buildings in the Dockyards style. It is based on the Fat Dragon Games Village Buildings format, including posts, walls, and gables with a new Dockyards style. NOTE: this set does not include floors or roofs. You will need to own one of the FDG building sets for those (e.g. Timberframe, Wooden, or Walls & Gate). Recommended...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dockyards: Low Docks

Dockyards: Low Docks


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of low docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Dockyards: Stone Piers

Dockyards: Stone Piers


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or...   [click here for more]
DungeonPrint  $10.99

Add to RPGNow.com Order  
Dockyards: Water & Wood

Dockyards: Water & Wood


One of the Dockyards series, this set includes 11 DragonbiteTM-compatible STL files for a the water around the docks and some dressing to put on the docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom...   [click here for more]
DungeonPrint  $4.99

Add to RPGNow.com Order  
Dockyards: Wharf

Dockyards: Wharf


This set of 3d-printable STLs lets you build Dockyard boardwalks and buildings on wooden stilts. It includes bases with stilts in the water, and with a mix of stilts and Dockyard stone walls. It also includes boardwalk surfaces with and without posts to tie ships up to. You can build boardwalks out of these models. Additionally, if you own any of the Fat Dragon Games Village Building sets, you...   [click here for more]
DungeonPrint  $6.99

Add to RPGNow.com Order  
Dockyards: Wood Piers

Dockyards: Wood Piers


One of the Dockyards series, this set includes 13 DragonbiteTM-compatible STLs files that assemble into 10 different pieces for a variety of elevated wood piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Note that the wood piers extending over water print in multiple parts and must be snapped or clipped together; instructions and pictures are...   [click here for more]
DungeonPrint  $7.99

Add to RPGNow.com Order  
DungeonPrint Halloween

DungeonPrint Halloween


Is it that time of year already? Thrill your players with this Spooktacular set of 3D-printable terrain, including a crypt, numerous graves and gravestones, and a pumpkin patch -- including the Great Pumpkin himself! This set includes more than 40 STLs in all, compatible with all DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm,...   [click here for more]
DungeonPrint  $12.99 $10.31

Add to RPGNow.com Order  
HexScapes

HexScapes


Create hex-based landscapes with this variety pack of 3D-printable STL files. DungeonPrint HexScapes contains 6 models, each approximately 35mm wide. Alternating DragonbiteTM clip slots allow for elevation changes. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or...   [click here for more]
DungeonPrint  $4.99

Add to RPGNow.com Order  
Konga: A Dark Place

Konga: A Dark Place


Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own. See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777 Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother...   [click here for more]
DungeonPrint  $1.99

Add to RPGNow.com Order  
Peaceful Fountains

Peaceful Fountains


This set is a companion to Peaceful Gardens, the May 2018 DungeonPrint Community Choice set. It includes three large fountains, as pictured on the product cover and in the following 3D view: Fountain Display 2 by zergchops on Sketchfab RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill: 10% recommended Top/Bottom...   [click here for more]
DungeonPrint  $2.99

Add to RPGNow.com Order  
Peaceful Gardens

Peaceful Gardens


This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways. The center of the bridge prints in two parts, and you should glue the two parts together. RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill: 10% for all models...   [click here for more]
DungeonPrint  $9.99

Add to RPGNow.com Order  
Rowboat

Rowboat


This set of 3d-printable STLs lets you print fantasy rowboats, with or without front-mounted hanging lanterns (and with or without nets and barnacles for decoration). The cover photo shows a painted version of the rowboat with lantern. If you'd like a bigger or smaller boat, the rowboat, lantern, and oar models can be scaled accordingly. Recommended Print Settings: Layer...   [click here for more]
DungeonPrint  $3.99

Add to RPGNow.com Order  
Displaying 1 to 14 (of 14 items) Result Pages:  1 
Select Page Number