Secret Agents of CROSS Fillable Character SheetWhat is CROSS?CROSS is a clandestine spy agency also known as the Catholic Response Organization to Strategize and Strike. CROSS was created by rogue Cardinal James McDonnell to take the Pope's prayers and convert them into actions. He and his command staff create missions to protect the flock from evil using... [click here for more]
Secret Agents of CROSS Fillable Character SheetWhat is CROSS?CROSS is a clandestine spy agency also known as the Catholic Response Organization to Strategize and Strike. CROSS was created by rogue Cardinal James McDonnell to take the Pope's prayers and convert them into actions. He and his command staff create missions to protect the flock from evil using... [click here for more]
What is CROSS?CROSS is a clandestine spy agency also known as the Catholic Response Organization to Strategize and Strike. CROSS was created by rogue Cardinal James McDonnell to take the Pope's prayers and convert them into actions. He and his command staff create missions to protect the flock from evil using cutting-edge technology coupled with saintly magic honed over 2000... [click here for more]
Game Tokens: Aim Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens:Ammo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Arcade Coin STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Atom STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Aztec Coin STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Bandage STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Battery STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Biohazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Black Widow STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Blessed Machine Logo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings... [click here for more]
Game Tokens: Blinded Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Bomb STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Bound Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Brain Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more]
Game Tokens: Brown Bear Paw STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Caddy STL
This product is for a digital STL file for use with your 3D printer. This caddy will hold up to 400 tokens from the Blessed Machine token collection available here:
https://www.drivethrurpg.com/browse/pub/7646/Blessed-vMachine/subcategory/22110_40245/Tokens
Included with the STL is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more]
Game Tokens: Camera STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Carrot STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Caterpillar STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Chaos STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Chemical Hazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Circuits STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Claw Mark STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Cola Bottle Cap STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Coronavirus STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Crossed Swords STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Crosses STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Defend Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Distracted Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings... [click here for more]
Game Tokens: Dragon Head STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Entangled Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Exhausted Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Explosion STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Fan STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Fangs STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Fatigue Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more]
Game Tokens: Fireball STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: First Aid STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Flight Stick STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Fly STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens:Gas Can STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Gear STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Gift STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more]
Game Tokens: Grenade STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Game Tokens: Hanging Bat
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more]
Log In 
