Command Station Table (3D Printing)

SCI-FI  GEAR: COMMAND STATION TABLE (3D Printing STL File)

The grid bathes you in a glow of bluish light as you lean forward to study a few details. "Enemy fighters appear to be coming in from the south, and we're getting some odd frequency signals from the northeast"
"I see that? Anything coming up on our scanners?"
"Nothing but static so far... I just want to know what that big blip is... its getting bigger by the minute.."
"Yeah, I see that... call the orders to have our laser turrets ready."

The Command Station Table is a sci-fi equipment prop perfect for space opera settings as well as other futuristic genres, including post apocalypse, cyberpunk, high tech super hero, etc.

Recommended Print Dimensions: X:34mm, Y:34mm, Z:23mm

Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very slow, but should provide you a nice finish with details.
Since these filing cabinets are not much different than test pieces you should be fine with speeding these settings up... if you prefer a nice clean finish then use the recommended slow settings.

Layer Height: 0.06mm
Wall Thickness: .8mm
Top Thickness: .6mm (10 layers)
Bottom Thickness: .6mm (10 layers)
Horizontal Expansion: 0mm
Infill Density: 15mm (Grid Pattern)
Printing Temperature: 200 C (for PLA)
Build Plate Temperature: 60 C
Enable Retraction: Yes
Print Speed: 40mm