DriveThruComics
DriveThruFiction
Powered by DriveThruRPG


Home » Dockyards [BUNDLE] » Publisher Hub » » Filters: Aether Studios (X) | Dungeons & Dragons (X) | Horror (X)
Close
Close
Advanced Search

Dockyards [BUNDLE]

Dockyards [BUNDLE]

ADD TO WISHLIST >
Bundle
$57.91 
$66.91
This special bundle product contains the following titles.



Bloody Reef
Regular price: $2.99
Bundle price:
 $2.49
Format:
 ZIP File
Finish off your harbor with this selection of 7 models including five giant rock formations in the water, an ominous dorsal fin, and Sharky McSharkFace himself!  Models are delivered in STL format and DragonbiteTM-compatible. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none, except 5mm brim for upper shark teeth Related Sets: Dockyards Boardwalk -- elevated boardwalks Dockyards Buildings (Coming Nov 1!) -- boardwalks/buildings on stilts over water Dockyards Low Docks -- low stone boardwalks and low wood piers Dockyards Stone Piers -- a...

Dockyards: Boardwalk
Regular price: $8.99
Bundle price:
 $7.99
Format:
 ZIP File
One of the Dockyards series, this set includes 16 DragonbiteTM-compatible STLs files for a variety of boardwalks and low stone piers.  In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: Dockyards Buildings -- seaside buildings in the FDG village style Dockyards Low Docks -- low stone boardwalks and low wood piers Dockyards Stone Piers -- all-stone waterfront areas Dockyards Wharf-- boardwalks/buildings on stilts over w...

Dockyards: Buildings
Regular price: $9.99
Bundle price:
 $8.99
Format:
 ZIP File
This set of 3d-printable STLs lets you build endless varieties of buildings in the Dockyards style.  It is based on the Fat Dragon Games Village Buildings format, including posts, walls, and gables with a new Dockyards style. NOTE: this set does not include floors or roofs.  You will need to own one of the FDG building sets for those (e.g. Timberframe, Wooden, or Walls & Gate). Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: FDG Timberframe buildings FDG Wooden buildings FDG Walls & Gate Dockyards...

Dockyards: Low Docks
Regular price: $9.99
Bundle price:
 $8.99
Format:
 ZIP File
One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of low docks.  In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: Dockyards Boardwalk -- elevated boardwalks Dockyards Buildings -- seaside buildings in the FDG village style Dockyards Stone Piers -- all-stone waterfront areas Dockyards Wharf -- boardwalks/buildings on stilts over water Dockyards Wood Piers -- elevated w...

Dockyards: Stone Piers
Regular price: $10.99
Bundle price:
 $9.49
Format:
 ZIP File
One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of stone piers.  In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: Dockyards Boardwalk -- elevated boardwalks Dockyards Buildings -- seaside buildings in the FDG village style Dockyards Low Docks -- low stone boardwalks and low wood piers Dockyards Wharf -- boardwalks/buildings on stilts over water Dockyards Wood Piers ...

Dockyards: Water & Wood
Regular price: $4.99
Bundle price:
 $4.49
Format:
 ZIP File
One of the Dockyards series, this set includes 11 DragonbiteTM-compatible STL files for a the water around the docks and some dressing to put on the docks.  In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: Dockyards Boardwalk -- elevated boardwalks Dockyards Buildings -- seaside buildings in the FDG village style Dockyards Low Docks -- low stone boardwalks and low wood piers Dockyards Stone Piers -- all-stone waterfront a...

Dockyards: Wharf
Regular price: $6.99
Bundle price:
 $5.49
Format:
 ZIP File
This set of 3d-printable STLs lets you build Dockyard boardwalks and buildings on wooden stilts.  It includes bases with stilts in the water, and with a mix of stilts and Dockyard stone walls.  It also includes boardwalk surfaces with and without posts to tie ships up to.  You can build boardwalks out of these models.  Additionally, if you own any of the Fat Dragon Games Village Building sets, you can also place building floors on top of the bases included in this set, to create buildings on stilts. There are also three separate stone support pieces, which you can use to hold up a second level of tiles with the stone side showing underneath. Finally, this set includes a bonus Fishmonger's Stand, where the wares from the incoming ships (be they fish or otherwise) ca...

Dockyards: Wood Piers
Regular price: $7.99
Bundle price:
 $6.49
Format:
 ZIP File
One of the Dockyards series, this set includes 13 DragonbiteTM-compatible STLs files that assemble into 10 different pieces for a variety of elevated wood piers.  In combination with the other Dockyards sets, you can create an entire port area for your games! Note that the wood piers extending over water print in multiple parts and must be snapped or clipped together; instructions and pictures are included in the README. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Exceptions described in the README for certain pieces Related Sets: ...

Rowboat
Regular price: $3.99
Bundle price:
 $3.49
Format:
 ZIP File
This set of 3d-printable STLs lets you print fantasy rowboats, with or without front-mounted hanging lanterns (and with or without nets and barnacles for decoration).  The cover photo shows a painted version of the rowboat with lantern. If you'd like a bigger or smaller boat, the rowboat, lantern, and oar models can be scaled accordingly. Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: The rowboat and these two sets were inspired in part by The Kobold Docks map by Dyson Logos: https://rpgcharacters.wordpress....

Total value: $66.91 Special bundle price: $57.91 Savings of: $9.00 (13%)
Reviews (0)
Discussions (0)
Narrow Results
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!
 Recent History













Product Information
Author(s)
Publisher Stock #
AES-1003
Format
Original electronic
Scanned image
These products were created by scanning an original printed edition. Most older books are in scanned image format because original digital layout files never existed or were no longer available from the publisher.

For PDF download editions, each page has been run through Optical Character Recognition (OCR) software to attempt to decipher the printed text. The result of this OCR process is placed invisibly behind the picture of each scanned page, to allow for text searching. However, any text in a given book set on a graphical background or in handwritten fonts would most likely not be picked up by the OCR software, and is therefore not searchable. Also, a few larger books may be resampled to fit into the system, and may not have this searchable text background.

For printed books, we have performed high-resolution scans of an original hardcopy of the book. We essentially digitally re-master the book. Unfortunately, the resulting quality of these books is not as high. It's the problem of making a copy of a copy. The text is fine for reading, but illustration work starts to run dark, pixellating and/or losing shades of grey. Moiré patterns may develop in photos. We mark clearly which print titles come from scanned image books so that you can make an informed purchase decision about the quality of what you will receive.
Original electronic format
These ebooks were created from the original electronic layout files, and therefore are fully text searchable. Also, their file size tends to be smaller than scanned image books. Most newer books are in the original electronic format. Both download and print editions of such books should be high quality.
This title was added to our catalog on July 15, 2019.
Publisher
Aether Studios
Publisher Average Rating